Labor Rates
If you don't see what you need, just give us a call and we can give you a custom quote.
| Service |
Price |
| Clean Head |
$10.00 |
| Mill Heads (.020) |
$35.00 |
| Angle Mill Heads |
$150.00 |
| Steet Valve Job |
$75.00 |
| Comp Valve Job |
$150.00 |
| 4 cyl. Valve Job |
$65.00 |
| 6 cyl. Valve Job |
$75.00 |
| Overhead Cam Valve Job |
$85.00 |
| Pressure Test Head |
$40.00 |
| Set Spring Height |
$40.00 |
| Install Studs |
$100.00 |
| Cut for Pushrods |
$75.00 |
| CC both Heads |
$120.00 |
| Flow Test (1 Head) |
$75.00 |
| Match Head to Int. |
$150.00 |
| Port and Polish Heads |
$800.00 |
| Service |
Price |
| Degree Cam |
$50.00 |
| Mill Intake |
$50.00 |
| Press Wheel Bearing |
$25.00 |
| Service |
Price |
| Clean Block |
$40.00 |
| Inst. Cam Bearings |
$20.00 |
| Inst. Freeze Plugs |
$15.00 |
| Bore Block (per cyl.) (ea.) |
$12.00 |
| Hone w/ TRQ plate |
$100.00 |
| Clearance for Stroker |
$75.00 |
| O-Ring Deck |
$125.00 |
| Align Hone Mains |
$100.00 |
| Deck Block |
$100.00 |
| Check Deck Height |
$50.00 |
| Cut Ring Gap |
$50.00 |
| De-burr Block |
$75.00 |
| Deglaze Cyls |
$20.00 |
| Pressure Test Block |
$65.00 |
| Align Bore |
$250.00 |
| Install Splayed Caps |
$100.00 |
| Fill Block |
$75.00 |
| Assemble Engine |
Call |
| Service |
Price |
| Rotating Assy. (not incl. metal) |
$250.00 |
| Lighten Crank |
Call |
| Service |
Price |
| Clean and Mic Crank |
$35.00 |
| Turn Crank |
$75.00 |
| Magnaflux |
$30.00 |
| Knife Edge |
$100.00 |
| Chamfer Oil Holes |
$20.00 |
| Service |
Price |
| Tester123 |
$100.00 |
| Service |
Price |
| Recondition Rod (ea.) |
$12.00 |
| Check Rod (ea.) |
$5.00 |
| Brush Little End (ea.) |
$15.00 |
| Cut Side Clearance (ea.) |
$4.00 |
| Install Rod Bolts (ea.) |
$1.00 |
| Drill Oil Hole (ea.) |
$2.00 |
| Check rod Clearance |
$30.00 |
| Service |
Price |
| Press Piston On and Off (ea.) |
$5.00 |
| Service |
Price |
| Drill Oil Hole |
$75.00 |
| Dyno Tuning-SBC or BBC Only |
$500.00 |
